Fitxer:PP series batteries.JPG
Aquest fitxer prové de Wikimedia Commons i pot ser usat per altres projectes. La descripció de la seva pàgina de descripció es mostra a continuació.
Resum
| DescripcióPP series batteries.JPG |
English: The complete range of PP batteries.
From left to right: PP1, PP3, PP4, PP6, PP7, PP8, PP9, PP10, PP11 Only the PP3 is in common use today, the PP8 and PP9 are sometimes used for specialist applications. |
| Data | |
| Font | Treball propi |
| Autor | Lead holder |
Llicència
- Sou lliure de:
- compartir – copiar, distribuir i comunicar públicament l'obra
- adaptar – fer-ne obres derivades
- Amb les condicions següents:
- reconeixement – Heu de donar la informació adequada sobre l'autor, proporcionar un enllaç a la llicència i indicar si s'han realitzat canvis. Podeu fer-ho amb qualsevol mitjà raonable, però de cap manera no suggereixi que l'autor us dóna suport o aprova l'ús que en feu.
- compartir igual – Si modifiqueu, transformeu, o creeu a partir del material, heu de distribuir les vostres contribucions sota una llicència similar o una de compatible amb l'original.
| Anotacions InfoField | Aquesta imatge té anotacions: Vegeu-les a Commons |
PP1: This battery type was 6 volts and had 2 snap connectors. They were spaced 35.0 mm apart. It is an Exide Drymax.
PP4: This battery was the only cylindrical PP battery. The type was 9 volts and had 2 snap connectors, one on the top and one on the bottom H 50.0 Diameter: 25.5
PP6: This battery type was 9 volts and had 2 snap connectors. Centre distance between terminals is max 12.95 mm with both offset 7 mm nominal from the wider battery edge.
H 70.0 mm L 36.0 mm
W 34.5 mm
PP7: This battery type was 9 volts and had 2 snap connectors. Centre distance between terminals is max 19.2 mm.
H 63 mm
L 46 mm
W 46 mm
PP8: This battery type was 6 volts and had 2 snap connectors. This battery typically had 2 snap connectors, however 4 connector versions are available. They were spaced 35.0 mm apart.
H 200.8 L 65.1 W 51.6
PP9: This battery type was 9 volts and had 2 snap connectors. They were spaced 35.0 mm apart. It is a GP version and as such is slightly smaller then a "standardised" PP9.
H 81.0 L 66.0 W 52.0
PP10: This battery had 2 pin connectors. They were a single ⌀3.2 mm negative pin and a single ⌀4.0 mm positive pin spaced 13.0 mm apart.
H 226.0 L 66.0 W 66.0
PP11: This battery had 4 pin connectors. 9V was available by wiring in series.
There were two ⌀3.2 mm negative pins spaced 9.5 mm apart and two ⌀4.0 mm positive pins spaced 14.3 mm apart.
Negative and positive pins were spaced 18.1 mm apart.
H 91.3 L 65.1 W 52.4
PP3: Commonly used today.
Goes by many names: Radio battery, Smoke alarm battery, Square battery, Transistor battery, 6LR61, 6F22, 1604
Added to ANSI standard in 1959 Often contains six LR61 cells, which are similar to and often interchangeable with AAAA cells.
H: 48.5 L: 26.5 W: 17.5
Llegendes
Elements representats en aquest fitxer
representa l'entitat
Algun valor sense element de Wikidata
27 jul 2014
image/jpeg
Historial del fitxer
Cliqueu una data/hora per veure el fitxer tal com era aleshores.
| Data/hora | Miniatura | Dimensions | Usuari/a | Comentari | |
|---|---|---|---|---|---|
| actual | 12:26, 23 juny 2019 | 1.600 × 705 (495 Ko) | wikimediacommons>Ubcule | Brightness/contrast only. |
Ús del fitxer
La pàgina següent utilitza aquest fitxer: